Show simple item record

dc.contributor.advisorPahlevani, Majid
dc.contributor.authorMardani Boroujeni, Fatemeh
dc.date2019-11
dc.date.accessioned2019-08-13T14:32:55Z
dc.date.available2019-08-13T14:32:55Z
dc.date.issued2019-08-12
dc.identifier.citationMardani Boroujeni, F. (2019). A Digital Control System for UPS Systems with Smart Grid Capability (Unpublished master's thesis). University of Calgary, Calgary, AB.en_US
dc.identifier.urihttp://hdl.handle.net/1880/110715
dc.description.abstractSmart grids have recently become the center of attention for modernizing the grid system. In future smart-grids, energy storage systems are one of the key components, which can complement intermittent renewable energy sources and in turn increase reliability and efficiency of the grid system. Modern Uninterruptible Power Supply (UPS) systems can provide storage capacity for future smart grids since they usually include batteries. UPS systems can also provide instant electrical power to sensitive equipment and grid during various events such as brownout, power failures, spikes, voltage surges, EMI/RF noise, and frequency variations. Future UPS systems require to have much better dynamics in order to deal with transients. The control system of UPS systems mainly determines their dynamical performance and transient response. The existing state-of-the-art UPS control systems are based on linear PI controllers for the most part. Thus, current UPS systems usually show a sluggish transient response and they are not suited for future smart grid applications where instant power is required to maintain the system. In this thesis, new UPS systems with improved transient response are proposed. The proposed UPS system utilities a new controller that is able to improve the dynamic performance and allows for various smart grid functionalities. The proposed control system is based on the adaptive control theory, which adaptively changes the controller's parameters based on the UPS operating conditions. Furthermore, the proposed control system isolates the double-frequency ripple from the battery in the normal/charging mode as well as in the backup/discharging mode. Therefore, the new UPS system is well-suited for single-phase systems utilizing lithium-ion battery as storage. Mathematical analysis, simulation, and experimental results are presented to verify the performance of the proposed control system and demonstrate its superior performance.en_US
dc.language.isoengen_US
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectUninterruptible Power Supplyen_US
dc.subjectPower Electronicsen_US
dc.subjectNonlinear Controlen_US
dc.subject.classificationEngineering--Electronics and Electricalen_US
dc.titleA Digital Control System for UPS Systems with Smart Grid Capabilityen_US
dc.typemaster thesisen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
thesis.degree.nameMaster of Science (MSc)en_US
thesis.degree.disciplineEngineering – Electrical & Computeren_US
thesis.degree.grantorUniversity of Calgaryen_US
dc.contributor.committeememberNowicki, Edwin Peter
dc.contributor.committeememberZareipour, Hamidreza
ucalgary.item.requestcopyfalseen_US


Files in this item

Thumbnail
Embargoed until: 2019-11-22

This item appears in the following Collection(s)

Show simple item record